Glossary

on-board diagnostics

What is OBD-II?

OBD-II (on-board diagnostics, second generation) is the standard diagnostic system in modern cars, utes and vans. Its 16-pin port under the dashboard gives a mechanic's scan tool or a plug-in GPS tracker access to engine and vehicle data.

Updated 18 November 2026

Read the definition

Updated 18 November 2026

Where is the OBD-II port?

The OBD-II port is a 16-pin socket inside the cabin, usually under the dashboard on the driver's side near the steering column. In some vehicles it sits behind a small cover or beside the fuse panel. The owner's manual shows the exact spot.

The port supplies power as well as data, so a device that plugs into it needs no wiring.

What data comes from the OBD-II port?

The vehicle's computers report through the port. The common readings are:

  • Vehicle speed.
  • Engine speed (RPM).
  • Coolant temperature.
  • Diagnostic trouble codes, which are the fault codes behind a check-engine light.
  • Odometer and fuel consumption, on vehicles that share them.

What you get depends on the make, model and year. An OBD-II connector does not guarantee that a vehicle shares its fuel, odometer, RPM or diagnostic data, so check the vehicles you run before you rely on a reading.

Why does OBD-II matter for GPS tracking?

A plug-in GPS tracker uses the port for power and for vehicle data. That makes it the simplest way to start tracking:

  • No wiring. The tracker plugs in and starts reporting.
  • Easy to move. When a vehicle is replaced, the tracker moves to the next one.
  • Vehicle data with the location. Speed, odometer and engine readings arrive with each trip, where the vehicle shares them.

A fitted tracker is wired into the vehicle instead. It stays out of sight and adds inputs a plug-in tracker doesn't have, such as driver identification and equipment switches. Telematics explains how both send their data to the software.

Which vehicles in Australia have an OBD-II port?

Most cars, utes and vans on Australian roads have one. On-board diagnostics is part of Australia's emission rules for light vehicles (Australian Design Rule 79), so the port has been standard equipment for years.

Many trucks use a different, round diagnostic connector. A plug-in tracker reaches those through a truck adapter.

How does IntelliTrac use the OBD-II port?

The EP26 Easy plugs straight into the OBD-II port and reports the vehicle's location, trips and movement to the IntelliTrac Platform. If it is unplugged, your team gets a notification, and another when it is reconnected.

With the OBDII+ option, the Easy also reads vehicle speed, odometer and RPM from the port, with high-RPM alerts. It reads coolant temperature, diagnostic trouble codes and fuel consumption on vehicles that share them.

For trucks, IntelliTrac recommends the Easy with a truck adapter, the Elite or the Edge ES810. Compare each GPS tracking device for vehicles to choose.

IntelliTrac GPS tracking starts from $12 a vehicle a month, with devices from $150 and a no-lock-in option.

Sources and further reading

Your questions

What you need to know.

OBD-II stands for on-board diagnostics, second generation. It is the standard way a modern car, ute or van reports engine and vehicle data through a 16-pin port under the dashboard.

Yes. OBD2, OBDII and OBD-II are three ways of writing the same standard. The port and the data are identical.

Yes. A plug-in GPS tracker takes its power from the port and starts reporting, with no wiring. IntelliTrac's EP26 Easy plugs straight into the OBD-II port and sends a notification if it is unplugged.

Some do, but many trucks use a different, round diagnostic connector. IntelliTrac's Easy tracker reaches those with a truck adapter. For trucks, IntelliTrac recommends the Easy, the Elite or the Edge ES810.

Put the term into practice.

See how IntelliTrac captures the relevant checks, trips and supporting data during normal work. Bring your scenarios.

Book a DemoExplore Solutions

IntelliTrac provides fleet, telematics and field-operations software in Australia. Call 1300 767 492.